Summoner (Thor)
Authorized archive access confirmed. Select an alternate configuration below to review recovered component sets and interface data.
Chassis Data
| Release Year | 2872 |
| Class | Heavy |
| Type | OmniMech |
| Mass | 70 tons |
| Speed | 86 km/h |
Archive Summary
The Summoner is a highly mobile heavy OmniMech fielded primarily by Clan Jade Falcon. Developed shortly after the Clans acquired OmniMech technology, it became one of the most successful early second-generation OmniMechs.
Known to the Inner Sphere as the Thor, the name was inspired by its iconic pairing of PPC and autocannon weaponry, evoking lightning and thunder.
Its balanced combination of speed, armor, and modular firepower allows it to perform effectively across a wide variety of battlefield roles.
Recovered component set for long range combat Alt. Config A.
Left Arm – Upper Section
Summoner Prime upper arm component copy. Serves to join the shoulder connection to the lower arm section. This part uses two interfaces and is available in multiple mounting configurations.
| Variant Options | |
| Shoulder Joint: | Pin or Magnet |
| Elbow Joint: | Pin or Stub |
Left Arm – Lower Section
Gauss Rifle replacement lower arm assembly to convert the Prime to Alt. Config A. Intended to interface with the upper arm section of the Prime, or by using the upper arm section on the H.
| Variant Options | |
| Joint: | Pin or Stub |
Left Arm Insert ***Option***
Gauss Rifle tip insert component used when retaining the original Prime miniature arm structure. Remove the existing arm tip and replace it with this insert. After removing the arm tip, you can drill a 2.5mm bore to install and glue, or use the flat version.
| Variant Options | |
| Insert: | None or Stub |
Right Arm
Large Pulse Laser right arm replacement part for Alt. Config A.
| Variant Options | |
| Shoulder Joint: | Pin or Magnet |
Right Arm Insert ***Option***
Large Pulse Laser tip insert component used when retaining the original Prime miniature arm structure. Remove the existing arm tip and replace it with this insert. After removing the arm tip, you can drill a 2.5mm bore to install and glue, or use the flat version.
| Variant Options | |
| Insert: | None or Stub |
Left Torso Component
Hellbringer SRM6 mirrored and intended as the left torso conversion element for Alt. Config A.
| Variant Options | |
| Interface: | None or Magnet |
| File | Used For |
| LEFT ARM UPPER — Choose 1 | |
| SMN_Prime_ARM_L_Upper_Mag_Pin | Upper 3x1 magnet slot and lower pin hole |
| SMN_Prime_ARM_L_Upper_Mag_Stub | Upper 3x1 magnet slot and lower stub |
| SMN_Prime_ARM_L_Upper_Pin_Pin | Upper pin hole and lower pin hole |
| SMN_Prime_ARM_L_Upper_Pin_Stub | Upper pin hole and lower stub |
| LEFT ARM LOWER — Select 1 | |
| SMN_A_ARM_L_Lower_Pin | Full arm lower section with pin hole |
| SMN_A_ARM_L_Lower_Stub | Full arm lower section with stub hole |
| SMN_A_ARM_L_Lower_Insert | Left arm muzzle insert for modifying the Prime arm |
| RIGHT ARM — Select 1 | |
| SMN_A_ARM_R_Pin | Full arm with pin hole |
| SMN_A_ARM_R_Mag | Full arm with 3x1 magnet hole |
| SMN_A_ARM_R_Insert | Right arm muzzle insert for modifying the Prime arm |
| TORSO — Required | |
| Clan_Nu_SRM6R_Mag | SRM6 launcher with 3x2 magnet hole |
Recovered component set for missile bombardment combat Alt. Config B.
Left Arm – Upper Section
Summoner Prime upper arm component copy. Serves to join the shoulder connection to the lower arm section. This part uses two interfaces and is available in multiple mounting configurations.
| Variant Options | |
| Shoulder Joint: | Pin or Magnet |
| Elbow Joint: | Pin or Stub |
Left Arm – LRM20 Version 1 ***CHOICE***
Left arm shoulder-mounted LRM launcher in the style of IWM.
| Variant Options | |
| Interface: | None |
Left Arm – SRM4 Version 1 ***CHOICE***
Left arm SRM launcher in the style of IWM.
| Variant Options | |
| Interface: | Pin |
Left Arm – LRM20 & SRM4 Arm Version 2 ***CHOICE***
Left arm LRM and SRM launcher as depicted in the CCG.
| Variant Options | |
| Interface: | Pin |
Right Arm – Upper Section
Summoner Prime upper arm component copy mirror. Serves to join the shoulder connection to the lower arm section. This part uses two interfaces and is available in multiple mounting configurations.
| Variant Options | |
| Shoulder Joint: | Pin or Magnet |
| Elbow Joint: | Pin or Stub |
Right Arm – LRM20 Version 1 ***CHOICE***
Right arm shoulder-mounted LRM launcher in the style of IWM.
| Variant Options | |
| Interface: | None |
Right Arm – SRM4 Version 1 ***CHOICE***
Right arm SRM launcher in the style of IWM.
| Variant Options | |
| Interface: | Pin |
Right Arm – LRM20 & SRM4 Arm Version 2 ***CHOICE***
Right arm LRM and SRM launcher as depicted in the CCG.
| Variant Options | |
| Interface: | Pin |
Anti-Missile System (AMS)
Summoner H AMS module. 2.5mm diameter drill x 3mm depth drill required.
| Variant Options | |
| Interface: | Stub |
Narc Launcher – Variant 1 ***CHOICE***
Torso-mounted Narc beacon launcher for missile guidance support.
| Variant Options | |
| Interface: | None or Magnet |
Narc Launcher – Variant 2 ***CHOICE***
Alternate Narc launcher. Drills into the torso. 2.5mm diameter drill x 3mm depth drill required.
| Variant Options | |
| Interface: | Stub |
| File | Used For |
| LEFT ARM UPPER — Select 1 | |
| SMN_Prime_ARM_L_Upper_Mag_Pin | Upper 3x1 magnet slot and lower pin hole |
| SMN_Prime_ARM_L_Upper_Pin_Pin | Upper pin hole and lower pin hole |
| LEFT ARM Missiles— Select version 1 or 2 files | |
| Version 1:SMN_B_L1 | Lower Left Arm with SRM4, Pin. |
| Version 1:LRM20L | LRM20 launcher to be mounted on shoulder. |
| Version 2:SMN_B_L2 | Lower Left Arm with LRM20 and SRM4, Pin. |
| RIGHT ARM UPPER — Select 1 | |
| SMN_Prime_ARM_L_Upper_Mag_Pin_Mirror | Upper 3x1 magnet slot and lower pin hole |
| SMN_Prime_ARM_L_Upper_Pin_Pin_Mirror | Upper pin hole and lower pin hole |
| RIGHT ARM Missiles— Select version 1 or 2 files | |
| Version 1:SMN_B_R1 | Lower Right Arm with SRM4, Pin. |
| Version 1:LRM20R | LRM20 launcher to be mounted on shoulder. |
| Version 2:SMN_B_R2 | Lower Reft Arm with LRM20 and SRM4, Pin. |
| Torso Narc - Select 1 | |
| SMN_B_Narc1 | Narc launcher to be installed on top of torso. Magnet slot. |
| SMN_B_Narc2 | Narc launcher to be installed into the torso. Requieres drilling. It has a stub. |
Recovered component set for close range brawler Alt. Config C.
Left Arm – Upper Section
Summoner Prime upper arm component copy. Serves to join the shoulder connection to the lower arm section. This part uses two interfaces and is available in multiple mounting configurations.
| Variant Options | |
| Shoulder Joint: | Pin or Magnet |
| Elbow Joint: | Pin or Stub |
Left Arm – Lower Section
Ultra Autocannon 20 replacement lower arm assembly to convert the Prime to Alt. Config C. Intended to interface with the upper arm section of the Prime, or by using the upper arm section on the H.
| Variant Options | |
| Joint: | Pin or Stub |
Left Arm Insert ***Option***
Ultra Autocannon 20 tip insert component used when retaining the original Prime miniature arm structure. Remove the existing arm tip and replace it with this insert. After removing the arm tip, you can drill a 2.5mm bore to install and glue, or use the flat version.
| Variant Options | |
| Insert: | None or Stub |
Right Arm
Summoner H arm intended to be used as an ER Large Laser and ER Small Laser right arm weapon assembly for Alt. Config C. Designed as a full replacement arm component.
| Variant Options | |
| Shoulder Joint: | Pin or Magnet |
Right Arm Insert ***Option***
ER Large Laser and ER Small Laser tip insert component used when retaining the original Prime miniature arm structure. Remove the existing arm tip and replace it with this insert. After removing the arm tip, you can drill a 2.5mm bore to install and glue, or use the flat version.
| Variant Options | |
| Insert: | None or Stub |
Left Torso Component
SRM6 torso-mounted component intended as the left torso conversion element for Alt. Config C.
| Variant Options | |
| Interface: | None or Magnet |
| File | Used For |
| LEFT ARM UPPER — Choose 1 | |
| SMN_Prime_ARM_L_Upper_Mag_Pin | Upper 3x1 magnet slot and lower pin hole |
| SMN_Prime_ARM_L_Upper_Mag_Stub | Upper 3x1 magnet slot and lower stub |
| SMN_Prime_ARM_L_Upper_Pin_Pin | Upper pin hole and lower pin hole |
| SMN_Prime_ARM_L_Upper_Pin_Stub | Upper pin hole and lower stub |
| LEFT ARM LOWER — Select 1 | |
| SMN_C_ARM_L_Lower_Pin | Full arm lower section with pin hole |
| SMN_CA_ARM_L_Lower_Stub | Full arm lower section with stub hole |
| SMN_C_ARM_L_Lower_Insert | Left arm muzzle insert for modifying the Prime arm |
| RIGHT ARM — Select 1 | |
| SMN_C_ARM_R_Pin | Full arm with pin hole |
| SMN_C_ARM_R_Mag | Full arm with 3x1 magnet hole |
| SMN_C_ARM_R_Insert | Right arm muzzle insert for modifying the Prime arm |
| TORSO — Required | |
| Clan_Nu_SRM6R_Mag | SRM6 launcher with 3x2 magnet hole |
Recovered component set for Multi-roll Alt. Config D.
Left Arm
Summoner H arm intended to be used as an ER Large Laser and ER Medium Laser right arm weapon assembly for Alt. Config C. Designed as a full replacement arm component.
| Variant Options | |
| Shoulder Joint: | Pin or Magnet |
Left Arm Insert ***Option***
ER Large Laser and ER Medium Laser tip insert component used when retaining the original H miniature arm structure. Remove the existing arm tip and replace it with this insert. After removing the arm tip, you can drill a 2.5mm bore to install and glue, or use the flat version.
| Variant Options | |
| Insert: | None or Stub |
Left Arm
Summoner H arm intended to be used as an ER Large Laser and ER Medium Laser right arm weapon assembly for Alt. Config C. Designed as a full replacement arm component.
| Variant Options | |
| Shoulder Joint: | Pin or Magnet |
Left Arm Insert ***Option***
ER Large Laser and ER Medium Laser tip insert component used when retaining the original H miniature arm structure. Remove the existing arm tip and replace it with this insert. After removing the arm tip, you can drill a 2.5mm bore to install and glue, or use the flat version.
| Variant Options | |
| Insert: | None or Stub |
Anti-Missile System (AMS)
Summoner H AMS module. 2.5mm diameter drill x 3mm depth drill required.
| Variant Options | |
| Interface: | Stub |
Torso MG
Summoner D Torso MG. 2.5mm diameter drill x 3mm depth drill required.
| Variant Options | |
| Interface: | Stub |
| File | Used For |
| LEFT ARM UPPER — Choose 1 | |
| SMN_H_ARM_L_Pin | Full left arm with pin hole |
| SMN_H_ARM_L_Mag | Full left arm with 3x1 magnet slot |
| SMN_H_ARM_insert | insert to convert prime arm to H |
| RIGHT ARM — Select 1 | |
| SMN_H_ARM_R_Pin | Full right arm with pin hole |
| SMN_H_ARM_R_Mag | Full right arm with 3x1 magnet slot |
| SMN_H_ARM_insert | insert to convert prime arm to H |
| TORSO — Required. 2 of both needed. | |
| SMN_H_AMS x 2 | AMS with stub |
| SMN_D_Torso_MG x 2 | MG with stub to drill into torso |
Recovered component set for Alt. Config E.
Left Arm – Upper Section
Summoner Prime upper arm component copy. Serves to join the shoulder connection to the lower arm section. This part uses two interfaces and is available in multiple mounting configurations.
| Variant Options | |
| Shoulder Joint: | Pin or Magnet |
| Elbow Joint: | Pin or Stub |
Right Arm – ATM Launcher Assembly
Arm-mounted ATM6 Launcher assembly for Alt. Config E. Designed as the right arm conversion component.
| Variant Options | |
| Joint: | Pin or Stub |
Right Shoulder – ATM12 Launcher Assembly
Shoulder-mounted ATM12 launcher assembly for Alt. Config E. Designed as the right arm conversion component.
| Variant Options | |
| Joint: | Pin or Stub |
Right Arm
Direct right arm replacement for Alt. Config E. Designed as a full replacement arm component.
| Variant Options | |
| Shoulder Joint: | Pin or Magnet |
| File | Used For |
| LEFT ARM — Select 1 | |
| SMN_Prime_ARM_R_Mag_Mirror | Full arm with 3x1 magnet slot |
| SMN_Prime_ARM_R_Pin_Mirror | Full arm with Pin Hole |
| RIGHT ARM Upper — Select 1 | |
| SMN_Prime_ARM_L_Upper_Mag_Pin_Mirror | Upper 3x1 magnet slot and lower pin hole |
| SMN_Prime_ARM_L_Upper_Pin_Pin_Mirror | Upper pin hole and lower pin hole |
| RIGHT ARM Missiles — Both | |
| SMN_E_ARM_R_Lower_Pin | Lower ATM 6 arm with pin hole. |
| Clan_Nu_2_ATM12R | Shoulder mounted ATM12 |
Recovered component set for Alt. Config F.
Left Arm
Ultra AC/5 and ER Medium Laser Left Arm replacement part for Alt. Config F.
| Variant Options | |
| Joint: | Pin or Magnet |
Left Arm Insert ***Option***
Ultra AC/5 and ER Medium Laser tip insert component used when retaining the original H miniature arm structure. Remove the existing arm tip and replace it with this insert. After removing the arm tip, you can drill a 2.5mm bore to install and glue, or use the flat version.
| Variant Options | |
| Joint: | None or Stub |
Right Arm
Ultra AC/5 and ER Medium Laser Right Arm replacement part for Alt. Config F.
| Variant Options | |
| Joint: | Pin or Magnet |
Left Arm Insert ***Option***
Ultra AC/5 and ER Medium Laser tip insert component used when retaining the original H miniature arm structure. Remove the existing arm tip and replace it with this insert. After removing the arm tip, you can drill a 2.5mm bore to install and glue, or use the flat version.
| Variant Options | |
| Joint: | None or Stub |
Right Torso ER Medium Laser
Torso-mounted ER Medium Laser for Alt. Config F. Requieres drilling 2.5mm diameter 3.0mm deep bore.
| Variant Options | |
| Interface: | Stub |
Left Torso LRM10
Timber Wolf style LRM10 Launcher for Alt. Config F.
| Variant Options | |
| Insert: | None or Magnet |
Left Torso LRM10 Overlay
Summoner Prime LRM 15 overlay converting it to an LRM 10 for Alt. Config F. Intended to use the Prime LRM15 launcher as the base.
| Variant Options | |
| Interface: | None |
| File | Used For |
| LEFT ARM — Choose 1 | |
| SMN_F_ARM_R_Mag_Mirror | Full left arm with 3x1 magnet slot |
| SMN_F_ARM_R_Pin_Mirror | Full left arm with pin hole |
| SMN_F_ARM_R_Insert | Insert to be used with Prime or H arm |
| RIGHT ARM — Choose 1 | |
| SMN_F_ARM_R_Mag | Full right arm with 3x1 magnet slot |
| SMN_F_ARM_R_Pin | Full right arm with pin hole |
| SMN_F_ARM_R_Insert | Insert to be used with Prime or H arm |
| TORSO — Required x 1 | |
| SMN_F_Torso_ERML | Torso mounted ERML with a stub |
| TORSO — Choose x 1 | |
| Clan_NU_LRM10_L_NoVent_Mag | Timber Wolf style LRM 10 launcher with magnet slot |
| Clan_NU_LRM10_L_NoVent_Mag | Timber Wolf style LRM 10 launcher with lower vent and with magnet slot |
| SMN_F_LRM_Overlay | LRM10 overlay for the Summoner Prime LRM15 Launcher. |
Recovered component set for Alt. Config G and Q.
Left Arm
Large Laser Left arm replacement part for Alt. Config G and Q.
| Variant Options | |
| Shoulder Joint: | Pin or Magnet |
Right Arm Insert ***Option***
Large Laser tip insert component used when retaining the original Prime miniature arm structure. Remove the existing arm tip and replace it with this insert. After removing the arm tip, you can drill a 2.5mm bore to install and glue, or use the flat version.
| Variant Options | |
| Insert: | None or Stub |
SRM Pod – Version 1 ***CHOICE***
Left torso missile pod for Alt. Config G and Q.
| Variant Options | |
| Interface: | None |
SRM Pod – Version 2 ***CHOICE***
Alternate left torso missile pod for Alt. Config G / Q. This version provides a second external shape option for the same side.
| Variant Options | |
| Interface: | None |
SRM Pod – Version 1 ***CHOICE***
Right torso missile pod for Alt. Config G and Q.
| Variant Options | |
| Interface: | None |
SRM Pod – Version 2 ***CHOICE***
Alternate right torso missile pod for Alt. Config G / Q. This version provides a second external shape option for the same side.
| Variant Options | |
| Interface: | None |
Center Torso Heavy Small Laser
Heavy Small Laser for Alt. Config G / Q center torso.
| Variant Options | |
| Interface: | stub |
| File | Used For |
| LEFT ARM — Select 1 | |
| SMN_A_ARM_R_Pin_Mirror | Full arm replacementn with pin hole |
| SMN_A_ARM_R_Mag_Mirror | Full arm replacementn with magnet slot |
| RIGHT ARM — Select 1 | |
| Use Summoner Prime | |
| Center TORSO — Select 1 | |
| SMN_G_Torso_HSL | Heavy small laser with stub inserted into chest after drilling. |
| LEFT TORSO — Select 1 | |
| SMN_G_Torso_SRM4_L_V1 | SRM4 x 3 crammed together. |
| SMN_G_Torso_SRM4_L_V2 | SRM4 x 3 more spaced out. |
| RIGHT TORSO — Select 1 | |
| SMN_G_Torso_SRM4_R_V1 | SRM4 x 3 crammed together. |
| SMN_G_Torso_SRM4_R_V2 | SRM4 x 3 more spaced out. |
Recovered component set for Alt. Config M.
SRM Launcher
Torso-mounted SRM launcher intended as the left torso conversion element for Alt. Config M.
| Variant Options | |
| Interface: | None or Magnet |
Left Torso ER Medium Laser
Torso-mounted ER Medium Laser intended as the left torso conversion element for Alt. Config M.
| Variant Options | |
| Interface: | Stub |
| File | Used For |
| LEFT ARM | |
| Keep the Summoner Prime Arm | |
| RIGHT ARM — Select 1 | |
| Keep the Summoner Prime Arm | |
| TORSO — Required | |
| Clan_Nu_SRM6R_Mag | SRM6 launcher with 3x2 magnet hole |
| SMN_F_Torso_ERML | Torso installed with stub and drill. |
Direct file retrieval.
Further Access Clearance Needed: